Leeson FHP Series NEMA 4x Variable Speed Drive Bedienungsanleitung PDF herunterladen (Seite 35)

Starting and stopping methods

(factory set to COAST position)

To coast the motor to a stop

Insure that JMP506 is set to the COAST position as shown

in Figure 13 (page 27). Refer to Figure 4 (page 4) for

Jumper Locations. To coast the motor to a stop open the

ENABLE/DISABLE switch, or remove the jumper between

ENABLE (E2) and COMMON (E1) terminals of TB501.

Refer to (page 19) for instructions on switch installation.

To brake the motor to a stop

Insure that JMP506 is set to the BRAKE position as shown

in Figure 13 (page 27). Refer to Figure 4 (page 4) for

Jumper Locations. Confirm BRAKE CURRENT and

BRAKE TIME potentiometers are calibrated to a desired

value. BREAK CURRENT is adjustable from 0-100% of

rated output current. BRAKE TIME is adjustable from 1 -12

seconds. To brake the motor,

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 66 67

Keine Kommentare

Leeson FHP Series NEMA 4x Variable Speed Drive Bedienungsanleitung Seite 35