Leeson PWM DC Control: 174299 Bedienungsanleitung PDF herunterladen (Seite 20)

Instead of using a speed adjust potentiometer, the drive may be wired to follow a 0 - 5 VDC

signal (Figure 10). Connect the signal input (+) to S2. Connect the signal common (-) to S1. Make no

connection to S3. A potentiometer can be used as a voltage divider to scale the analog input voltage.

The analog signal common must be the same common as the battery common connected to BAT-. It

is acceptable to connect the negative side of the battery to Earth ground in some applications.

Voltage follower

TB501

0 - 5 VDC

Figure 10. Voltage Follower Connections

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 34 35

Keine Kommentare

Leeson PWM DC Control: 174299 Bedienungsanleitung Seite 20